power thin film a power thin film a power thin film a power thin film a power thin film a ttenua ttenua ttenua ttenua ttenua tors tors tors tors tors dcn tf 124-d-0306 dcn tf 124-d-0306 dcn tf 124-d-0306 dcn tf 124-d-0306 dcn tf 124-d-0306 the msa the msa the msa the msa the msa t series thin film power chip attenuators provide attenuation accuracy for frequencies through t series thin film power chip attenuators provide attenuation accuracy for frequencies through t series thin film power chip attenuators provide attenuation accuracy for frequencies through t series thin film power chip attenuators provide attenuation accuracy for frequencies through t series thin film power chip attenuators provide attenuation accuracy for frequencies through 20 ghz. they offer the low noise, low stray capacitance and tight tolerance of thin film in compact sizes that 20 ghz. they offer the low noise, low stray capacitance and tight tolerance of thin film in compact sizes that 20 ghz. they offer the low noise, low stray capacitance and tight tolerance of thin film in compact sizes that 20 ghz. they offer the low noise, low stray capacitance and tight tolerance of thin film in compact sizes that 20 ghz. they offer the low noise, low stray capacitance and tight tolerance of thin film in compact sizes that make them ideal for smaller microwave and stripline applications at operating powers to 2 watts. make them ideal for smaller microwave and stripline applications at operating powers to 2 watts. make them ideal for smaller microwave and stripline applications at operating powers to 2 watts. make them ideal for smaller microwave and stripline applications at operating powers to 2 watts. make them ideal for smaller microwave and stripline applications at operating powers to 2 watts. mechanical da mechanical da mechanical da mechanical da mechanical da t t t t t a a a a a size size size size size substra substra substra substra substra te te te te te bond pads bond pads bond pads bond pads bond pads backside surface backside surface backside surface backside surface backside surface resistor ma resistor ma resistor ma resistor ma resistor ma terial terial terial terial terial electrical da electrical da electrical da electrical da electrical da t t t t t a a a a a a a a a a ttenua ttenua ttenua ttenua ttenua tion range tion range tion range tion range tion range a a a a a ttenua ttenua ttenua ttenua ttenua tion accuracy tion accuracy tion accuracy tion accuracy tion accuracy frequency range frequency range frequency range frequency range frequency range impedance impedance impedance impedance impedance vswr vswr vswr vswr vswr -1db through -24db; ( 0.5db steps available ) -1db through -24db; ( 0.5db steps available ) -1db through -24db; ( 0.5db steps available ) -1db through -24db; ( 0.5db steps available ) -1db through -24db; ( 0.5db steps available ) 0.2db 0.2db 0.2db 0.2db 0.2db dc through 20 ghz dc through 20 ghz dc through 20 ghz dc through 20 ghz dc through 20 ghz 50 50 50 50 50 ? ? ? ? ? 1.5:1 max. 1.5:1 max. 1.5:1 max. 1.5:1 max. 1.5:1 max. common series da common series da common series da common series da common series da t t t t t a a a a a current noise current noise current noise current noise current noise power ra power ra power ra power ra power ra ting ting ting ting ting t t t t t .c.r. .c.r. .c.r. .c.r. .c.r. high temp exposure high temp exposure high temp exposure high temp exposure high temp exposure thermal shock thermal shock thermal shock thermal shock thermal shock st st st st st ability ability ability ability ability opera opera opera opera opera ting temp range ting temp range ting temp range ting temp range ting temp range stra stra stra stra stra y distributed y distributed y distributed y distributed y distributed cap cap cap cap cap acit acit acit acit acit ance ance ance ance ance alumina alumina alumina alumina alumina -20db typical -20db typical -20db typical -20db typical -20db typical 2 w 2 w 2 w 2 w 2 w a a a a a tts, (70c dera tts, (70c dera tts, (70c dera tts, (70c dera tts, (70c dera ted linearl ted linearl ted linearl ted linearl ted linearl y to 150c) p = y to 150c) p = y to 150c) p = y to 150c) p = y to 150c) p = e e e e e 2 2 2 2 2 /r /r /r /r /r 150ppm/c 150ppm/c 150ppm/c 150ppm/c 150ppm/c 150c, 100 hrs., 150c, 100 hrs., 150c, 100 hrs., 150c, 100 hrs., 150c, 100 hrs., 0.25% max. 0.25% max. 0.25% max. 0.25% max. 0.25% max. ? ? ? ? ? r/r: r/r: r/r: r/r: r/r: 0. 0. 0. 0. 0. 03 03 03 03 03 % msi typical % msi typical % msi typical % msi typical % msi typical mil-std 202, method 107f mil-std 202, method 107f mil-std 202, method 107f mil-std 202, method 107f mil-std 202, method 107f , , , , , 0.25% max. 0.25% max. 0.25% max. 0.25% max. 0.25% max. ? ? ? ? ? r/r: r/r: r/r: r/r: r/r: 0.1% msi typical 0.1% msi typical 0.1% msi typical 0.1% msi typical 0.1% msi typical 1000 hrs., 70 1000 hrs., 70 1000 hrs., 70 1000 hrs., 70 1000 hrs., 70 c, c, c, c, c, 100% power 100% power 100% power 100% power 100% power , , , , , 0.5% max. 0.5% max. 0.5% max. 0.5% max. 0.5% max. ? ? ? ? ? r/r: r/r: r/r: r/r: r/r: 0.1% msi typical 0.1% msi typical 0.1% msi typical 0.1% msi typical 0.1% msi typical -5 -5 -5 -5 -5 5 5 5 5 5 c to +150c c to +150c c to +150c c to +150c c to +150c 0.06pf 0.06pf 0.06pf 0.06pf 0.06pf msa msa msa msa msa t t t t t p p p p p art number designa art number designa art number designa art number designa art number designa tion tion tion tion tion msa msa msa msa msa t t t t t -5, msa -5, msa -5, msa -5, msa -5, msa t t t t t -6, msa -6, msa -6, msa -6, msa -6, msa t t t t t -7 series -7 series -7 series -7 series -7 series 0.148" x 0.122" (0.003") x 0.025" (0.003") 0.148" x 0.122" (0.003") x 0.025" (0.003") 0.148" x 0.122" (0.003") x 0.025" (0.003") 0.148" x 0.122" (0.003") x 0.025" (0.003") 0.148" x 0.122" (0.003") x 0.025" (0.003") 99.6% alumina 99.6% alumina 99.6% alumina 99.6% alumina 99.6% alumina 25k ? min. gold; wire or ribbon bondable, or solderable. 25k ? min. gold; wire or ribbon bondable, or solderable. 25k ? min. gold; wire or ribbon bondable, or solderable. 25k ? min. gold; wire or ribbon bondable, or solderable. 25k ? min. gold; wire or ribbon bondable, or solderable. gold gold gold gold gold t t t t t ant ant ant ant ant alum nitride alum nitride alum nitride alum nitride alum nitride example: msa example: msa example: msa example: msa example: msa t 7g-03db (msa t 7g-03db (msa t 7g-03db (msa t 7g-03db (msa t 7g-03db (msa t 7 series: -3db) t 7 series: -3db) t 7 series: -3db) t 7 series: -3db) t 7 series: -3db) xg xg xg xg xg 5 5 5 5 5 6 6 6 6 6 7 7 7 7 7 series series series series series db db db db db chip chip chip chip chip a a a a a ttenua ttenua ttenua ttenua ttenua tors tors tors tors tors mini-systems, inc. thin film division thin film division thin film division thin film division thin film division 20 da 20 da 20 da 20 da 20 da vid road, n. a vid road, n. a vid road, n. a vid road, n. a vid road, n. a ttleboro, ma 02760 ttleboro, ma 02760 ttleboro, ma 02760 ttleboro, ma 02760 ttleboro, ma 02760 508-695-0203 fax: 508-695-6076 508-695-0203 fax: 508-695-6076 508-695-0203 fax: 508-695-6076 508-695-0203 fax: 508-695-6076 508-695-0203 fax: 508-695-6076 msat-7 fully surface mountable msat-6 top contact w/ wraparound ground msa t -5 top cont act w/ gold back input output ground input output ground input output ground
|
